How Often To Change Brake Fluid: Expert Tips

Brake fluid is one of the crucial parts of your car as it save you from an unfortunate incident. To maintain the brake it requires brake fluid and there is a correct technique to apply the fluid. Brake fluid prevents the brake from corrosion and fends against moisture which will lead to vapour lock brake failure. So, you must know, how often to change brake fluid:

How Often to Change Brake Fluid?

Here is a general guideline for you to change the brake fluid after every 1 or 2 years, as recommended:

• Many manufacturers suggest changing brake fluid after every 2 years or 24K miles as standard practice.
• You must always sticks to your vehicle owner manual for specific recommendations.
• If you usually drive in extreme conditions like, heavy towing, frequent stop-and-go traffic or terrains then you may need to change the fluid more frequently.

When to Change Brake Fluid?

You should consider changing brake fluid, if:

• The colour of fluid should be clear or light yellow and if it appears dark or has particles then it’s time to change it.
• Brake fluid absorbs moisture which will lead to decrease in performance. Testing for moisture content can help in determine, if the change is necessary.
• If your brakes feel spongy or less responsive then it could indicate air in the system which is possibly due to old or contaminated fluid.
• After any brake car parts has been repair, it is advisable to change the fluid to ensure the better performance.

How to Change Brake Fluid?

• First, remove the cap from the brake fluid and clean the area around to prevent it from entering the dirt. Now, check the fluid level and add more fluid, if requires.
• To locate the bleed screws, go to the brake calipers on each wheel.
• To slightly loosen the caliper’s bleed screw, use a wrench. Ask a helper to hold down the brake pedal while pressing it many times.
• Open the bleed screw and then close it before your helper releases the pedal.Repeat this until the fluid runs clear and without bubbles.
• Starting with the caliper that is farthest away from the master cylinder, do this for each one.
• To keep the master cylinder fluid from running dry, monitor its level and add more as needed.
• After all calipers have been bled, fill the reservoir with the proper amount of brake fluid, replace the cap, and tighten the lid.
• Any fluid that has spilled should be cleaned up because it might harm surfaces like paint.
• To make sure the brakes feel responsive and firm after changing the fluid, test drive the car.

Related: Clicking Noise in Dashboard When Car is Off

In The End

In summary, we conclude that a person must know how often to change brake fluid of their vehicle. You can change it by your own in few easy steps, just simply adhere the above mentioned steps to complete the process.