How to Jump Start a Car like a Pro

Ever found yourself stuck with a dead car battery and no help nearby? Learning how to jump start a car by yourself can save the day!. Jump starting your automobile battery allows you to recharge it sufficiently to resume driving or head straight to the repair shop. Jump-starting a car by you can be done safely without any hassle in few steps. Here’s how to do it:

What You Will Require?

• Functional vehicle
• A set of jumper wires
• A dead battery in your automobile

With the help of these things, you can easily jump start a car. Now, simply follow these steps to know how to jump start a car.

Steps to Jump Start a Car

Position Both Cars

• To make sure the automobile with the dead battery does not come into contact with the operating vehicle, usually known as the donor, park it close by.
• Turn off both the cars and make sure all the lights, accessories and engine are also off.

Open Hoods

Just simple open the hoods of both car and locate the batteries; you can remove the battery covers, if necessary.

Identify Terminals

You must locate both batteries’ positive and negative connections. The negative terminal is identified by a black cover or color, and the positive terminal is identified by a red cover or color.

Connect Jumper cables

• For the red jumper, take the cable and connect the positive terminal of the dead battery to one end and the good battery to the other.
• To lower the possibility of sparks, you must connect one end of the black jumper cable to the grounded metal portion of the dead automobile and the other end to the negative terminal of the good battery.

Start Both Vehicle One-By-One

• First, you need to start the donor vehicle. Just turn on the working vehicle’s engine and let it run for a short while. The dead battery will be charged as a result.
• Wait for few minutes then start the dead batter car and if it doesn’t start then you need to wait for few more minutes before you try again.

Disconnect Cables

After starting your vehicle, you must carefully unplug the jumper cables in the opposite order that they were connected:

• Start by unplugging the black cable from the dead car’s grounded metal section.
• Next, take the black wire out of the good battery’s negative terminal.
• Next, take the red cable out of the good battery’s positive terminal.
• Finally, take the red cable out of the dead battery’s positive terminal.

Let Your Car Run

Once your car is started just keep your car in motion for about 20 minutes at least which will allow the alternator to recharge the battery.

Also Read: How Many Volts is a Car Battery?

In The End

In summary, we conclude that you must know how to jump start a car. If you stuck somewhere then you can be easily resolve the issue; if you know the steps to jump-start a car or you can take the help of this blog,